Showing posts with label sewing. Show all posts
Showing posts with label sewing. Show all posts

Tuesday, May 31, 2016

Voile Datura Deer and Doe Blouse

Hello everyone, meet my new Datura blouse. This is my first Deer and Doe pattern and I absolutely love it! 

Unfortunately, there aren't many apparel fabric shops around me. There are quite a few quilting shops near me but they usually only carry a few apparel fabrics if any. So I was excited hear about this little lovely shop in Burlington, Vermont. It was definitely a pricey little shop but Vermont is all about shopping local and supporting small businesses and I like to help out. I really fell in love with the triangle cut out blouse and the fun button detail on the back. I picked out this lovely lightweight cotton voile to make it up in. I think it's kind of a coral orange color. I love it, it's so bright and summery. I also picked up some Robert Kaufman Chambray that has an interesting herringbone design for another True Bias Southport Dress. Truth is I've been making a lot of garments lately but I haven't found the motivation to share them, we'll see. 
This was my first time making a fully lined yoke and it was a little tricky. The instructions are very brief and they leave a lot of helpful information out in my opinion. So I used a helpful blog post I found when scouring the internet for other daturas.  It seems many others have used it as well. 

I also found the instructions on how to sew the bias tape around the neck line to be seriously lacking. The bias tape finish around the triangles isn't quite as nice as I'd like it to be but I feel like I did the best that I could without any pictures or better advice than to keep it pulled tight. I feel like there should be more pictures to explain how to sew the tape to the triangles nicely. 

Fit details:
I made the largest size to fit my bust and graded down two sizes from the bust dart to the bottom hem because I'm all top and no bottom. This worked out really well for me. 

I found the dart to be too high and I think maybe an inch too long. I left it alone this time but I'm planning on altering it for my next one. 


Oh and I was really confused when finishing the inside of the yoke. The instructions tell you to fold up the edge at 5/8 and then top stitch but there is no way you can do that at the armhole/armpit area. It's just way to small. I had to trim this spot down and then force it to fold/roll up into a tiny space. It worked out in the end but I'm definitely not happy about it. So I think next time I'm going to use a 3/8 or maybe even a 1/4 inch seem allowance on this part. I think it will both lower the dart and give me more room to fold up the yoke lining. I'll just baste it first but I'd be interested to hear from anyone who had this issue. I feel like it's only a problem for the largest size and maybe the next one down. Well that's it for now. I have a black and abstract white polka dot rayon fabric to make the peter pan collar version so maybe I'll post that soon... 

Thursday, February 18, 2016

Flannel Archer Button Up

I finally finished my Archer Button Up!
I stumbled across a Grainline Studio pattern at the cutest quilting/fabric shop. It was the Lark pattern. I didn't buy it but I did go home to check them out online. After looking at the Grainline studio blog and a bunch of google searching I decided to buy the Archer pattern and I'm so happy I did.

I wanted to make a flannel shirt and my local shop has some lovely Robert Kaufman mammoth flannel so I went with the blue beauty on the left.

I printed out my pattern put it together and then I made parchment paper pattern pieces in my size. Afterwards I regretted not just buying the printed pattern.
I followed Grainline's post on how to make this cute little change to the pockets.

Like a lot of other ladies I decided to cut out the pockets and the back yoke on the bias.



I worked really hard to make sure all of my pieces matched up. Again I used their blog post on matching plaid. The only difficulty I had was caused by the thickness of the fabric. However, I love this fabric and my Archer is so comfy and cozy I really adore it. 

This is the muslin I made to check my size and to practice making a button up shirt. This was actually my first button up shirt. I did make a few changes to both shirts. For the muslin I cut off 1.5 inches off the bottom edge and for my flannel shirt I shortened the pattern by one inch. For the muslin I over lapped the cuffs more than the pattern calls for because they were so large. When I made my flannel shirt I trimmed the cuffs 1/4 inch on the edges and then I added an extra fold to the sleeve. I did prewash my flannel so after I finished it I washed and dried it and it did not shrink. I did not wash the muslin and so it did shrink. The picture is before it shrunk. It's just more fitted now and the sleeves aren't as long. The flannel shirt is a little loose on me kind of like a boyfriend style shirt which I really like but for my next archer I think I'm going to go down a size.
I do really love this pattern. I have plans to make a sleeveless one and a popover and maybe one that is both! My only complaints are the cuffs and the sleeves where they meet are too big. They are too long for me as well. I'm going to shorten them another half to full inch next time. I'm also not crazy about the original pocket but that's it really. I can't wait to make more of them.

Thursday, August 20, 2015

My Out And About Dress


Hello Everyone!
I just want to share my Out and About Dresses.
I made one with a less expensive navy fabric first and then I made my green dress out of this bright and happy summery fabric. Making the navy dress first gave me a change to work out any issues I might have and just be familiar with the pattern. I definitely think making the navy dress first helped me make the green dress much better. The second time around I made some spray starch with corn starch, water, and a couple drops of jasmine oil. This really helped me sew the neck and arm holes. I also made a few other changes like deciding to use my quarter inch foot to sew the bands on.
I really love both my dresses!

First I made a freezer paper copy of the size I wanted to use. 





This navy fabric is reversible so I used the dot side for most of the dress but I decided to use the stripe side for the back. 




Ta da! 


Okay so I don't love everything about my navy dress. The neckline really isn't as nice as it could be and the hem on my sleeves are a little bulky. I did not use the cuff on them. Anyway I do really like it and I will wear it when we get some Fall weather. 

Now on to my green dress. I love this fabric, it's a Robert Kaufman line. 

I saw a blog where they said to try using some elastic to make perfect gathers. I gave it a try and I think it worked really well but it was a pain in the butt. It wasn't perfect, it was hard to do, and it adds more bulk so I'm not sure how I feel about it. I left the elastic in the back but took the time to rip out the front elastic after sewing the skirt and top together to reduce the bulk in the front. I do think it looks really nice though.




Lots and Lots of spray starch really helps to put on the neck bands and arm bands. 


I followed Sew Caroline's blog post for how to make a sleeveless dress. My only regret it not cutting out more fabric from the armpit area. 




This looks so much better! 

I really love it! 


So maybe I'm not done with this pattern yet. I believe this fabric for the skirt and a solid black top with long sleeves will make a really nice dress for winter with some leggings and my tall back boots... 




Tuesday, August 18, 2015

Star Layer Cake Quilt


Hello everyone! 
I just want to share the quilt I made for my Mom who celebrated her 50th birthday back in July.

I made half square triangles using the Missouri Star Quilting Co. way. 


I think these stars are called Hunter stars but I'm not sure I know I saw them online and I loved the idea.


My Mom loves purple.


So I was able to make 4 large stars and 5 diamonds out of the layer cake. You could also do pinwheels or another design but in the end I believe I used all of the fabric from the layer cake. The border and the 4 plain large squares I made by just cutting some yardage. The extra fabric did not go with the line, the fabric was just a similar type of batik that I found at my local shop.



You can see below I just used a bunch of scraps and other fabric I had on hand already to make the back. I don't really see the point of matching the back except maybe if you want your quilts to be reversible.



I just used some quilting pins to baste the quilt. I rolled the edge as I went along with the safety pins.



Time to quilt it...



I decided to just go around the stars and the diamonds. I then hand tied the centers and other places like the plain squares just putting the ties in the middle and I believe I evenly spaced 3 ties along the top border and another 3 on the bottom.



Again I always use a two inch strips sewn together on the diagonal with my quarter inch foot. I leave space before I start and after I end to sew the ends together. I over lap the two pieces two inches because they are two inch strips and then I sew them together diagonally, pictured above, to join them. You can find videos on how to join the binding this way on YouTube. That's how I taught myself.

The quilt was about a full size but a little under maybe. I'm slightly taller than my Mom so I was able to lay under it with it covering my feet nicely.
My Mom said she loves it and sleeps with it every night. I'm just happy she likes it.



Saturday, April 11, 2015

Half Circle Skirt Tutorial

Hello everyone! 
I started thinking about making a pretty skirt for spring maybe a few months ago. I live in the North (USA)so the weather is just starting to warm up for us(mid April). I just had some snow the other day. Anyway, I'm excited to wear my new skirts soon and I hope maybe you are excited to make one yourself. 

These are my photos of how I made my skirts. I'm posting this so that maybe I can inspire or help someone like myself. If you like, or use this post to make your own skirt please feel free to comment below and tell me your thoughts. 

Picture Tutorial:
This is an easy project as long as you have some prior sewing skills or knowledge. 

You will need:

Fabric: This will depend on your measurements. You can use the papers below to figure it out or if you think you're around my size then you can buy,
about 1 yard of 60" fabric, apparel fabric-(blue and flower skirt)
OR
about 1 1/4 to 1 1/2 yard of 45" fabric. (MY black and white skirt)

Elastic, Marking Tools, Thread, Scissors, Freezer paper or Parchment Paper, Pins... 

One of the first things you want to do is make a pattern. You don't have to do this but if you do it will be really easy to make more skirts. 


I took the time to write up how to make your own pattern and you can also use this to figure out the amount of fabric you will need.



Cutting out the skirt- one side is on the fold. 60"fabric
I did the same thing for this skirt. 

Now put right sides together and sew down the cut side with 5/8th seam allowance. 

I'm just using pinking shears to trim up the seam and prevent fraying.  I do not have serger or over locker but if you do you should use it. 

Next I used my waist measurement and subtracted around 4 inches or more. I made the mistake the first time of not making the elastic tight enough so you might want to pin it and try it on to make sure it's tight enough. 

Just sew down the cut edge around 1/4" should be good. I pressed my seam flat and then sewed next to the seam on both sides so it would lie flat. 
You will need to fold the skirt and the elastic so that they are divided into 4 equal quadrants. If you start at the seam and fold it in half you mark the opposite ends, then fold again and mark the other two points. I hope the pictures help...

Now take right sides together and pin the elastic to the skirt at the four points that you made. You do not want to pin all around because you will be stretching the elastic in the middle of these areas so that it will fit the skirt. 

It should look something like this. 

I put the seams together and started sewing with the elastic down against the machine. This worked well for me but you could try having the elastic on the top if you're having trouble. 
I back stitched at the start. If you're worried about the fit you might consider basting and trying on the skirt first. I did not do this for any of my skirts and for my first skirt I had to rip out the stitches (elastic was too big).


This next part is tricky. Take your time and go slow. You can use a 1/4" foot here if you have one. 
You want to pull the elastic to the point that the fabric lies flat or lines up with the elastic. Use both hands to guide the fabric. If you really need to you can pull it tight and then put a pin in the middle and then just sew the smaller sections but still stretching the elastic the entire time. 
Make sure you back stitch when you get back to where you started. 
Look you're almost done! 

Now you'll want to hem the bottom of your skirt. If you don't have a serger you can pink the edges like I did or you can fold the hem twice so that you won't have any fraying. I folded mine 1/2". It's a really good idea to iron the fold down before you start sewing so that you're hem looks nice and even. It will also help you as you are sewing around the curve. 
I used my 1/4" foot. 

TA DA!
I don't have a lot of junk in my trunk (lol), but if you do it will probably change the length of your fabric or how you'll need to hem it. Sorry I have no experience or advice in this area. 

Now on to the the 45" fabric. I bought this on a whim (on sale) and I'm glad I did. 
I was not able to fit the pattern so that one side was on the fold, so I had to cut out two pieces like this. This is no big deal, you will just have to sew up both sides right sides together. 

This time I used my rotary cutter with a pinking blade, it's so nice. 

I had plenty of extra fabric so I decided to make pockets. I mean who doesn't love pockets in skirts?
I used an old pattern piece from my first apparel project that I made in high school. I didn't want the pockets to be too big so I made them smaller. After the fact I kind of wish I had just used the bigger pocket pattern. - Oh well they work just fine.

If you don't know how to make pockets or have never made them before I suggest that you search YouTube for an inseam pocket tutorial.

If you don't want to make pockets just sew down both sides, right sides together, with at least a 1/4" seam.

There will be 4 total pocket pieces. You will want to take the time to measure where you want to place the pockets and then match the fabric up to check that all the pieces line up before you sew them. 

I folded the fabric in half to check that the pieces matched up perfectly. 

You will then sew each piece individually to the side of the fabric. You will sew 4 seams, each pocket to it's own edge alone. I started and stopped just before and after each pocket and I back stitched. 
Iron the pockets out like this... 

Pin both main pieces together matching all the edges and mark down the sides going around the pocket (blue line) and then back down. If you don't go around the pocket you won't have an open space for your hand. 

After you sew down and around it will look like this when you turn the skirt back out. You do both sides like this. 

Now you just need to sew on the elastic and hem the skirt. For the hem you can just do what I said above or if you want you can do a more fun decorative stitch like this... (Just make sure you iron before you do)

I love it! 
Say hi to Theia my yellow lab. 

Look I have pockets! 


That's All Folks! 
If you want to watch a video on how to make a half circle skirt there are a few on YouTube you can search for yourself but I suggest this one from a really cool girl who makes lots of neat stuff ...
https://youtu.be/7bHhMIzVA5k